Skip Navigation

Hollywood Burbank Airport Connections

Airplane_4.png

 

Take Metrolink to Hollywood Burbank Airport and connect to your flight without driving or parking. The Antelope Valley Line serves Burbank Airport–North; the Ventura County Line serves Burbank Airport–South. Both stations connect with airport shuttle service.

The new terminal opens October 13, 2026. For travel before October 13, follow the airport’s current bus and train instructions. The directions below apply starting October 13. Check your Metrolink train schedule and allow time for the airport connection.

 

VIA ANTELOPE VALLEY LINE AT BURBANK AIRPORT - NORTH STATION

Burbank Airport–North connects with the new terminal by an approximately half-mile walk via Cohasset Street or a complimentary on-demand shuttle. Call 818-729-2245 to request the shuttle. Shuttle service operates from 4:45 a.m. to 1:00 a.m. During an irregular or delayed flight operation, service continues until 45 minutes after the last flight.

From THE Train Station to the Airport

airport-connections-train-to-plane-shuttle.png

Antelope Valley Line - Burbank Airport - North Station

  1. Take the Antelope Valley Line to Burbank Airport–North.
  2. Walk approximately half a mile to the new terminal via Cohasset Street or call 818-729-2245 to request the complimentary shuttle.
  3. If taking the shuttle, meet it at the designated stop on San Fernando Boulevard at the north end of the station.

From The Airport to the train station

airport-connections-plane-to-train-shuttle.png

Antelope Valley Line - Burbank Airport - North Station

  1. To use the shuttle, call 818-729-2245 and follow signs to the shuttle pickup area on the ground floor of the parking structure directly across from the terminal. You may also walk approximately half a mile to the station via Cohasset Street.
  2. At Burbank Airport–North, purchase a ticket with Burbank Airport–North as your origin in the Metrolink mobile app or at a ticket machine.
  3. Board your Antelope Valley Line train.

Parking at Burbank Airport–North Station

There is no parking available at Burbank Airport–North.

  1.  

 

 

Parking at Burbank Airport - North Station

Currently, there is no parking at the Burbank Airport - North Station.

VIA VENTURA COUNTY LINE AT BURBANK AIRPORT - SOUTH STATION

Burbank Airport–South connects with the new terminal through the Regional Intermodal Transportation Center (RITC). Cross Empire Avenue between the station and the RITC, where you can board a complimentary airport shuttle. You do not need to request the South station shuttle by phone.

Shuttle service operates from 4:45 a.m. to 1:00 a.m. During an irregular or delayed flight operation, service continues until 45 minutes after the last flight.

From THE Train Station to the Airport

airport-connections-train-to-plane-shuttle.png

Ventura County Line - Burbank Airport - South Station

  1. Take the Ventura County Line to Burbank Airport–South.
  2. Cross Empire Avenue to the RITC.
  3. Board the complimentary airport shuttle at the designated curb in the RITC’s ground-floor bus area.

From The Airport to the train station

airport-connections-plane-to-train-shuttle.png

Ventura County Line - Burbank Airport - South Station

    1. Follow signs to the shuttle pickup area on the ground floor of the parking structure directly across from the terminal.
    2. Take the shuttle to the RITC, then cross Empire Avenue to Burbank Airport–South.
    3. Purchase a ticket with Burbank Airport–South as your origin in the Metrolink mobile app or at a ticket machine.
    4. Board your Ventura County Line train.

     

 

 

Parking at Burbank Airport - South Station

Metrolink's Burbank Airport - South station has very limited parking. For more information, please visit the station page.